Help: ICE_FLAGS_IPORT=PORT

This specifies a non-default input routing for a CORE or TUNER port

This specifies a non-default input routing for a CORE or TUNER port.  Normally, 
the input for a CORE or TUNER is the I/O module on the same side of the card for
acquisitions and the HOST for playback.  This flag can be used to specify an 
alternate input.  For example:

  sourcepic/port=core12 cbfile _cb MBT1X 1 0 /flags=(IPORT=TBANK1)

causes CORE12 to get its data from TunerBank1 instead of the default Module2.

  picd set ^device CORE 0x1 /port=core11