I/O Modules
SONETR4 SONETR5 SONETR2 SONET UDP/UDPR5 A2DR4 A2DR5 A2DR6 A2DR7 A2DR8 A2DR9 A2DR10 A2DR11 D2AR2 D2AR9 D2T LV2D/LV2DR5 D2LV/D2LVR5 PE2D FLZRXDR1 LBANDR1

 

TRP-SDN4
Cables
TRP-SMS8
I/O Modules
GIGEXD
Power
One Way Transfer

I/O Modules

Modules comprise the I/O interface for ICE PCI cards and rumeL signal transformation systems.  I/O modules interface to electrical as well as industry standard signal types and convert these signals to digital signals for acquisition/playback to/from computer systems.  Examples of the electrical and industry standard signals are Differential TTL, Gigabit Ethernet Fiber, Sonet Fiber, Analog, etc.

rumeL I/O Modules

RI(ICE)-LBD2DR1 L-Band Receiver/ Base Band Converter For Use With PIC5 or PIC6   ***NEW***
Input 925MHz to 2175 MHz
Input VGA For 80dB of Gain, (Input -77dBm to 16 dBm)
Output 4MHz to 33MHz Bandwidth
Dual Analog Devices AD6645 A/D Converters For 14 Bit Complex Samples, or 14 Bit Real Mode Samples
Multiple Clock Source-VCO Driven By 10Mhz  External Reference or 10MHz Ref or On-board
External Connector For 1-ppS TTL Input-Stored In Bit 0 Of 16 Bit Word (14 Bit Data MSB Aligned)
For Use With ICE-PIC5/PIC6 Series Of Cards or GIGEXD
Cost: $2500-Prototype Testing Now, Production/Delivery September 07

RI(ICE)-FLZRXDR1 400/800/1600 MBits/Sec Fiber Optic Module For Use With PIC6 or PIC5(**See Note)  ***NEW***
6 Channel Fiber Optic Data Interface Module 
Bi-Directional Rx or Tx Operations
400/800/1600/3200 Fiber Optic Data Rates
This is a dual site module.
Cost:$7000-Under Development
**Note-Use With PIC5 Limits Optical Interface To Only 4 Ports At 800 or 2 Ports At 1600 MBits/Sec

  RI(ICE)-A2DR4  Analog to Digital Converter Module 
One Analog Devices AD6644
14-bit 65 MSPS A/D Converter (AC coupled, 1Vp-p, 50ohm)
External (AC coupled 1Vp-p), Internal 40Mhz/N, or socketed crystal clock - software selectable.

Cost: $500-In Production

  RI(ICE)-A2DR5 Analog to Digital Converter Module

 Uses One Analog Devices AD9432 
12-bit 105 MSPS A/D Converter With Sampling Range Of 1 MSPS To 105 MSPS
Jumper Selectable DC or AC Coupling 1Vp-p, 50 Ohm Terminated
SMB Connector For External Clock Reference Derived Via A Comparator-AC coupled 1Vp-p.
Oscillator Socket For User Supplied Clock, Jumper Selectable With External Comparator Clock.
Cost: $750-In Production

  RI(ICE)-A2DR6 8 Bit A/D Module

Uses Analog Devices AD9054 
8-bit 200 MSPS A/D Converter 1Vp-p Analog Input Range 
External clock derived via a comparator-AC coupled 1Vp-p.
Oscillator Socket: For User Supplied Clock, Jumper Selectable With External Comparator Clock
Data Output As Two "Married" 8 Bit Samples At 1/2 Sampling Frequency 
Cost: $750-In Production

  RI(ICE)-A2DR7 14 Bit A/D Module

Uses Analog Devices AD6645 
14-bit 105 MSPS A/D Converter 1Vp-p Analog Input Range 
Jumper Selectable AC or DC Coupled Analog Input
External clock derived via a comparator-AC coupled 1Vp-p.
Oscillator Socket: For User Supplied Clock, Jumper Selectable With External Comparator Clock
External Connector For 1-ppS TTL Input-Stored In Bit 0 Of 16 Bit Word (14 Bit Data MSB Aligned)
Over/Underflow Output On Data Bit 1 Of 16 Bit Word (14 Bit Data MSB Aligned)
Cost: $750-In Production

  RI(ICE)-A2DR8 14 Bit A/D Module 

Uses Texas Instruments ADS5424
14-bit 105 MSPS A/D Converter 1Vp-p Analog Input Range 
Jumper Selectable AC or DC Coupled Analog Input
External clock derived via a comparator-AC coupled 1Vp-p.
Oscillator Socket: For User Supplied Clock, Jumper Selectable With External Comparator Clock
External Connector For 1-ppS TTL Input-Stored In Bit 0 Of 16 Bit Word (14 Bit Data MSB Aligned)
Over/Underflow Output On Data Bit 1 Of 16 Bit Word (14 Bit Data MSB Aligned)
For Use With ICE-PIC5 PCI Cards ONLY (not compatible with PIC4 series)
Cost: $750-In Production

  RI(ICE)-A2DR9 12 Bit A/D Module

Uses Texas Instruments ADS5444 A/D Converter 
13 Bit  250Mhz A/D Converter 
AC Coupled, Up to 10X Variable Gain Input Stage-Ideal For Connecting To RF Receivers
External Connector For 1-ppS TTL Input-Stored In Bit 0 Of 16 Bit Word (14 Bit Data MSB Aligned)
Multiple Clock Source-Direct  External Clock  Drive Using 1Vp-p Input Signal, User Supplied On Board 14 Pin Package Oscillator, Clock Synthesizer From Ext. 10MHz Ref or On-board 10MHz Ref. 
For Use With ICE-PIC5 Series Of Cards
Cost: $1000-In Production

  RI(ICE)-A2DR10  12 Bit A/D Module (Original 8 bit A2DR10 Module Replaced with this New Design)

Current NDA temporarily restricts rumeL, Inc from Listing Part Number or Manufacturer 
12 Bit 500MHz A/D Converter 
AC Coupled 1Vp-p Max Input
Multiple Clock Source-Direct  External Clock  Drive Using 1Vp-p Input Signal, User Supplied On Board 14 Pin Package Oscillator, Clock Synthesizer From Ext. 20MHz Ref or On-board 20MHz Ref. 
Requires No Extra Heat Sinking or Fans
For Use With ICE-PIC5 Series Of Cards
Cost: $1500-In Production

  RI(ICE)-A2DR11  8 Bit A/D Module        ***NEW***

Uses National Semiconductor  ADC08D1500 A/D Converter 
8 Bit 1.5 GHz A/D Converter 
AC Coupled 1Vp-p Max Input, Analog Bandwidth 3dB Cutoff at 30Mhz & 1.8GHz 
3 Clock Source Options
    (1) Direct  External Clock  Drive Using 1Vp-p Input Signal 
    (2) Clock Synthesizer From Ext. 10MHz Ref 
    (3) Clock Synthesizer From  On-board 10MHz Ref. 
Requires No Extra Heat Sinking or Fans
For Use With ICE-PIC5X or PIC5E PCI Cards (PIC5X Limited To 500 MBytes/Sec, PIC5E No Limitation-Full Rates)
Dual Site Module-Uses Both I/O Ports Of ICE Hardware
Cost: $3500-In Production

RI(ICE)-D2A  Digital to Analog Converter Module  ($750   In production)

One Analog Devices AD9754 14-bit 125MSPS D/A converter (AC coupled, 1Vp-p, 50ohm)
External (Jumper Selectable DC or AC coupled 1Vp-p), Internal 40Mhz/N, or socketed crystal clock - software selectable.
On Board Potentiometer For Gain Control.
Cost: $750-In Production

RI(ICE)-D2AR9  Digital to Analog Converter Module  ($1000   In production)

Complement Of The RI(ICE)-A2DR9 And RI(ICE)-A2DR10 
One Analog Devices AD9726 16-bit 400MSPS D/A converter (AC coupled, 1Vp-p, 50ohm)
Multiple Clock Source-Direct  External Clock  Drive Using 1Vp-p Input Signal, User Supplied On Board 14 Pin Package Oscillator, Clock Synthesizer From Ext. 20MHz Ref or On-board 20MHz Ref. 
For Use On the ICE-PIC5 Series of Cards
Note: ICE-PIC5 Capable Of 500MByte/Sec Throughput.  D2AR9 Can Be Used With 16 Bit Data Up To 250MHz Or Up To 400MHz With 8 Bit Data With ICE-PIC5 500MByte/Sec Limit
Cost: $1000-In Production
RI(ICE)-UDP/RI(ICE)-UDPR5   Network Interface Module-Supports SDDS Protocol
New Download Feature Now Allows For Direct Connect To SDDS Data Standard.
Hooks directly to gigabit fiber optic network. For data acquisition/playback from/to a network at over 95Megabytes/sec.
Supports Bidirectional Network communications in one module.
Encapsulates UDP & IP protocols (stripped TCP/IP) in hardware.
Supports ARP/RARP protocols for remote IP address receipt or user definable IP addresses.
Conforms to gigabit standards.
X-Midas/Nextmidas and C user interfaces.
Copper Interface:               P/N ICE-UDP-Cu           (For Use With PIC4 Series Of Cards Only)
850 nm   Fiber Interface:    P/N  ICE-UDP-850nm   (For Use With PIC4 Series Of Cards Only)
1310 nm Fiber Interface:   P/N ICE-UDP-1300nm  (For Use With PIC4 Series Of Cards Only)
SFP Interface:                     P/N ICE-UDPR5            (For Use With PIC5 Series Of Cards Only)
SFP Note: Copper SFP Is Standard.  At Time Of Order, 1300nm Or 810nm MUST Be Specified If Either Is Desired.

Copper   Interface Cost: $750    (In Production, For Use With PIC4 Series Of Cards Only)

850 nm   Interface Cost: $1000  (In Production, For Use With PIC4 Series Of Cards Only)

1310 nm Interface Cost: $1500  (In Production, For Use With PIC4 Series Of Cards Only

SFP        Interface Cost: $750     (In Production, For Use With PIC5 Series Of Cards Only

RI(ICE)-SONETR5   Sonet Interface Module For Use With PIC5 OR PIC4

Sonet Interface Module For Use With PIC5 OR PIC4

Dual Site Module-Uses Both I/O Ports Of ICE Hardware/rumeL signal transformation systems.
DUAL Bi-Directional, Interfaces To STM1, STM4, STM8, STM16,OC3, OC12, OC24, OC48
Output Interfaces To STM1, STM4, STM8, STM16, OC3, OC12, OC24, OC48, SDH Lines
Accepts G.709 FEC OC48 Input
Port 1 Provides STM1, STM4, STM8, STM16 BiDir Fiber Interface
Port 2 Provides STM1, STM4, STM8, STM16 BiDir Fiber Interface
INPUT-Port 1 is capable of realtime Demux of STM16 to User Selectable STM1, STM4, STM8
INPUT-Port 2 is capable of realtime Demux of STM16 to User Selectable STM1, STM4, STM8
OUTPUT-Port 1 is capable of "cloning" STM1, STM4, STM8 to STM16
OUTPUT-Port 2 is capable of "cloning" STM1, STM4, STM8, to STM16
Provides Bit Packing, Frame Alignment, and Descrambling/Scrambling
Rx 1310nm or 1550nm, Tx at 1300nm
Activating Rx Acquisition Provides For Feed Through To Tx Port Of Rx Data
Raw Input of FEC OC48, OC48 Data or Use Demux Function
Demux Operation Port 1: Software Selection Of Single STM1 Or STM4 From Raw STM16 Data Acquisition.
Demux Operation Port 2: Software Selection Of Single STM1 Or STM4 From Raw STM16 Data Acquisition
X-Midas/Nextmidas and C user interfaces.
LowNoiseFloor Provides Systems Capable Of Input/Output Of Full STM16 or FEC STM16 Rates With Full Integration Of Hardware & Software. (Full "Turn-key" Solutions)
Cost: $6500 (In Production )
Order P/N: RI(ICE)-SONETR5-P4 For Module With Interface To ICE PIC4T 
Order P/N: RI(ICE)-SONETR5-P5 For Module With Interface To ICE PIC5T 
RI(ICE)-SONETR4   Sonet Interface Module For Use With PIC5
Dual Site Module-Uses Both I/O Ports Of ICE Hardware/rumeL signal transformation systems.
Bi-Directional, Interfaces To STM1, STM4, STM8, STM16, STM64, OC3, OC12, OC24, OC48, OC192
Output Interfaces To  STM1, STM4, STM8, STM16, OC3, OC12, OC24, OC48,  OC192, SDH Lines
Accepts G.709 FEC OC192 Input and G.709 FEC OC48 Input
Port 1 Provides STM64 BiDir Fiber Interface
Port 2 Provides STM1, STM4, STM8, STM16 BiDir Fiber Interface
INPUT-Port 1 is capable of realtime Demux of STM64 to User Selectable STM1,STM4,STM8,STM16
INPUT-Port 2 is capable of realtime Demux of STM16 to User Selectable STM1, STM4, STM8
OUTPUT-Port 1 is capable of "cloning" STM1, STM4, STM16 to STM64
OUTPUT-Port 2 is capable of "cloning" STM1, STM4, STM8, to STM16
Provides Bit Packing, Frame Alignment, and Descrambling/Scrambling
Rx 1310nm or 1550nm, Tx at 1300nm
Activating Rx Acquisition Provides For Feed Through To Tx Port Of Rx Data
Raw Input of FEC OC48, OC48 Data or Use Demux Function
Raw Input of FEC OC192, 192 With Demux Function
Demux Operation Port 1: Software Selection Of Single STM1, STM4, or STM16 From FEC OC192 or OC192.
Demux Operation Port 2: Software Selection Of Single STM1 Or STM4 From  Raw STM16 Data Acquisition
X-Midas/Nextmidas and C user interfaces.
LowNoiseFloor Provides Systems Capable Of Input/Output Of Full STM16 Rates With Full Integration Of Hardware & Software. (Full "Turn-key" Solutions)
Cost: $6500 (In Production )
RI(ICE)-SONETR2   Sonet Interface Module 
Dual Site Module-Uses Both I/O Ports Of ICE Hardware/rumeL signal transformation systems.
Supports 2488.32, 1244.16, 622.08, or 155.52 MHz Line Rates  
Bi-Directional, Interfaces To STM1, STM4, STM8, STM16, OC3, OC12, OC24, OC48, SDH Lines
Provides Bit Packing, Frame Alignment, and Descrambling/Scrambling
Rx 1300nM, Tx at 1300nM
Activating Rx Acquisition Provides For Feed Through To Tx Port Of Rx Data
Raw Input of STM16 Data or Use Demux Function
Demux Operation: Software Selection Of Single STM1 Or STM4 From  Raw STM16 Data Acquisition
Realtime Hardware Demux: Allows the user to select 1 STM1 or STM4 from a STM4, STM8, or STM16 signal on port B and in realtime via a hardware muxing and clock recovery scheme play the STM1 or STM4 out port A.  In effect providing a realtime data demux to STM1 or STM4 equipment that cannot handle the throughput/rates of a STM4, STM8, or STM16 signal.
X-Midas/Nextmidas and C user interfaces.
Cost: $3500 (In Production )
RI(ICE)-SONET   Sonet Interface Module 
Operates at 155Mb/S or 622 Mb/S Fiber Line Rates
Bi-Directional, Interfaces To STM1, STM4, OC3, OC12, SDH Lines
Provides Bit Packing, Frame Alignment, and Descrambling
X-Midas/Nextmidas and C user interfaces.
Cost: $1500 (In Production )
RI(ICE)-D2T   Differential TTL Output Module 
One 16-bit RS422/RS485 Standard TTL to Differential TTL converter
Cost: $250-In Production

RI(ICE)-PE2D   16 Bit Input Differential PECL To Standard TTL Converter 

5V Differential Positive ECL Input Via 100K Interface Logic
Interfaces To Standard 40 Pin I/O Cables And Transition Panels
Cost: $250-In Production

RI(ICE)-LV2D/RI(ICE)-LV2DR5   16 Bit Input LVDS To Standard TTL Converter 

Works When Driven By 5V or 3.3V Powered Drivers
Interfaces To Standard 40 Pin I/O Cables And Transition Panels
Part Number RI(ICE)-LV2D       For ICE-PIC4 Series Of Cards
Part Number RI(ICE)-LV2DR5  For ICE-PIC5 Series Of Cards
Cost: $250-In Production

RI(ICE)-D2LV/RI(ICE)-D2LVR5   16 Bit Output TTL To Standard LVDS Converter 

Interfaces To Standard 40 Pin I/O Cables And Transition Panels
Part Number RI(ICE)-D2LV       For ICE-PIC4 Series Of Cards
Part Number RI(ICE)-D2LVR5  For ICE-PIC5 Series Of Cards

Cost: $250-In Production

RI(ICE)-SerialR1  100MHz Byte to 800MHz Serial Converter Module

This is a dual site module
User Supplied Reference For Output At Reference Rate Up To 800MHz
ECL 10/100K Output

Cost: $7000-In Production

ICE I/O Modules

These products are Innovative Computer Engineering's IO Modules. These modules provide a physical layer interface for the ICE line of PCI acquisition cards and the rumeL line of acquisition boxes.  They are listed here for convenience.  Sales for these modules may be placed either with ICE  or with rumeL.  

ICE-E2D  Differential ECL Input Module  ($250   In production)
One 16-bit F100K Differential ECL to Standard TTL converter
ICE-D2E  Differential ECL Output Module  ($250   In production)
One 16-bit Standard TTL to F100K Differential ECL converter
ICE-T2D  Differential TTL Input Module  ($250  In production)
One 16-bit RS422/RS485 Differential TTL to Standard TTL converter
Algorithms for handling port as 8 independent clock/data pairs
ICE-CXD  Communications Input/Output Module  ($500  In production)
One ITU G.703 Compliant 75 Ohm BNC Input for (E3/E2/E1 software selectable)
One ITU G.703 Compliant 75 Ohm BNC Output for (E3/E2/E1 software selectable)
Allowable I/O modes: E3in/out, E2in/out, E1in/out, E3in/E1out, E2in/E1out
ICE Altera IOC code supports AMI, HDB3, BZ3S, or BZ8S encoding/decoding
ICE Altera IOC code available for E3->E1, E2->E1 demultiplexing
ICE-UXD  User I/O Module   ($100  In Production)
Breadboard (0.1" grid) with module site TTL interface, mounting screws, 5V power and ground
Layout accepts 4 SMB Coaxial connectors or one 16 pin ribbon cable