RI(ICE)-A2DR4

Features

Jumper Settings For Power/Ground Connections

*  3.3V Digital Power Via Voltage Regulator: Default Power Setting When Delivered

** 3.3V Digital Power Via Board Header: Not An Available Source For The ICE-PIC3T or ICE-MBT3

*   5V Analog Power Via Board Header: Default Power Setting When Delivered

5V power is shared between digital logic and analog logic.

** 5V Analog Power Via External Power Source: 

For normal operation you will not need external power connections.  Users who wish to supply the analog circuitry a "quieter" external power source, separate from the digital power connection as provided above, can connect to one or both pins of J6 

a separate 5V supply.

1.) For Connecting To J6 Digi-Key Supplies a Terminal Housing.

    Part Number: WM2601-ND.

2.) You Will Also Need 2 Terminals For The Housing.

    Part Number: WM2200-ND

3.) Wires: 22-30 AWG.

*  Over/Under Driven: Status Bit 0 Set To Ground, Default Setting When Delivered

** Over/Under Driven: When The Analog Input Is Out Of Range Shorting Pins 1 & 2 Of J1 Will Provide This Status Bit On Bit 0

* Data Latch Clock Select: Default Setting When Delivered

** Data Latch Clock Select: For Normal Operation Pins 1 & 2 Should Always Be Shorted, Shorting Pins 2 & 3 Is Reserved For Future Applications.

Back To rumeL, Inc Products