A2DR8

SONETR4
SONETR5
SONETR2
SONET
UDP/UDPR5
A2DR4
A2DR5
A2DR6
A2DR7
A2DR8
A2DR9
A2DR10
A2DR11
D2AR2
D2AR9
D2T
LV2D/LV2DR5
D2LV/D2LVR5
PE2D
FLZRXDR1
LBANDR1

RI(ICE)-A2DR8

Features

	Uses Texas Instruments ADS5424
	14-bit 105 MSPS A/D Converter 1Vp-p Analog Input Range
	Jumper Selectable AC or DC Coupled Analog Input
	External clock derived via a comparator-AC coupled 1Vp-p.
	Oscillator Socket: For User Supplied Clock, Jumper Selectable With External Comparator Clock
	External Connector For 1-ppS TTL Input-Stored In Bit 0 Of 16 Bit Word (14 Bit Data MSB Aligned)
	Over/Underflow Output On Data Bit 1 Of 16 Bit Word (14 Bit Data MSB Aligned)
	For Use With ICE-PIC5 PCI Cards ONLY (not compatible with PIC4 series)

Cost: $750-In Production

Jumper Settings

DC or AC Coupled **

Jumper	DC Coupled	AC Coupled *
J7	1 & 2 SHORT	2 & 3 SHORT
J8	1 & 2 SHORT	2 & 3 SHORT
J9	1 & 2 SHORT	2 & 3 SHORT

* DC or AC Coupled: AC Coupled Is Default Setting When Delivered

** DC or AC Coupled: Note-For Sampling Rates Of 2 MSPS And Below DC Coupling Should Be Used.

Digital 3.3V Power Source

Jumper	Voltage Regulator *	Board Header **
J3	1 & 2 SHORT	OPEN
J4	1 & 2 SHORT	2 & 3 SHORT

* 3.3V Digital Power Via Voltage Regulator: Default Power Setting When Delivered

** 3.3V Digital Power Via Board Header: Not An Available Source For The ICE-PIC3T or ICE-MBT3

Analog 5V Power Source

Jumper	Board Header *	External **
J2	2 & 3 SHORT	1 & 2 SHORT

* 5V Analog Power Via Board Header: Default Power Setting When Delivered

5V power is shared between digital logic and analog logic.

** 5V Analog Power Via External Power Source:

For normal operation you will not need external power connections. Users who wish to supply the analog circuitry a "quieter" external power source, separate from the digital power connection as provided above, can connect to one or both pins of J2

a separate 5V supply.

1.) For Connecting To J2 Digi-Key Supplies a Terminal Housing.

Part Number: WM2601-ND.

2.) You Will Also Need 2 Terminals For The Housing.

Part Number: WM2200-ND

3.) Wires: 22-30 AWG.

External Clock Selection

Jumper	SMB Comparator *	User Supplied Oscillator **
J6	1 & 2 SHORT	2 & 3 SHORT

* Default Selection When Delivered.

** User Supplied Oscillator-Oscillator (X4) Should Be 5V With CMOS Output

Back To rumeL, Inc Products

Back To Innovative Computer Engineering Products