RI(ICE)-UDP

SONETR4
SONETR5
SONETR2
SONET
UDP/UDPR5
A2DR4
A2DR5
A2DR6
A2DR7
A2DR8
A2DR9
A2DR10
A2DR11
D2AR2
D2AR9
D2T
LV2D/LV2DR5
D2LV/D2LVR5
PE2D
FLZRXDR1
LBANDR1

RI(ICE)-UDP

An incorrect oscillator frequency on the UDP/SDDS, (modules used in combination with the ICE-PIC4 series only) has been discovered. Please follow the link below to read IMPORTANT information on UDP/SDDS recall information for UDP/SDDS modules purchased before April 1, 2005.

UDP/SDDS For PIC4 Series Recall Info Page

Features

	New Download Feature Now Allows For Direct Connect To SDDS Data Standard.
	Hooks directly to gigabit fiber optic network. For data acquisition/playback from/to a network at over 100Megabytes/sec.
	Supports Bidirectional Network communications in one module.
	Encapsulates UDP & IP protocols (stripped TCP/IP) in hardware.
	Supports ARP/RARP protocols for remote IP address receipt or user definable IP addresses.
	Conforms to gigabit standards.
	X-Midas/Nextmidas and C user interfaces.
	Copper Interface: P/N ICE-UDP-Cu (For Use With PIC4 Series Of Cards Only)
	850 nm Fiber Interface: P/N ICE-UDP-850nm (For Use With PIC4 Series Of Cards Only)
	1310 nm Fiber Interface: P/N ICE-UDP-1300nm (For Use With PIC4 Series Of Cards Only)
	SFP Interface: P/N ICE-UDPR5 (For Use With PIC5 Series Of Cards Only)
	SFP Note: Copper SFP Is Standard. At Time Of Order, 1300nm Or 810nm MUST Be Specified If Either Is Desired.
	Copper Interface Cost: $750 (In Production, For Use With PIC4 Series Of Cards Only)
	850 nm Interface Cost: $1000 (In Production, For Use With PIC4 Series Of Cards Only)
	1310 nm Interface Cost: $1500 (In Production, For Use With PIC4 Series Of Cards Only
	SFP Interface Cost: $750 (In Production, For Use With PIC5 Series Of Cards Only

The UDP/SDDS I/O module's latest firmware programming file download and example software, along with a description of the use of software switches, can be found on the software page.

Back To rumeL, Inc Products

Back To Innovative Computer Engineering Products