Rack Mount A/D & D/A Sytems

RI(ICE)-RMRF2 Single Or Dual Rack Mount A/D or D/A Converters

	Configurable As Single A/D Converter, Single D/A Converter, Single A/D & Single D/A Converters (Mixed I/O), Dual A/D Converters or Dual D/A Converters.
	Modular Design Allows For Use Of Different A/D and D/A Module Types
	For Dual A/D Configuration, Front panel switch selectable clocks allows four clock choices per A/D, choose between 2 external sources or 2 socketed oscillators.
	External sources derived via a comparator-AC coupled 1Vp-p.

	Single or Dual Input or Output Modules: 16-bit F100K Differential ECL Receivers or Drivers.
	Custom Designed Internal Low Ripple Power Supplies
	Less than 1nSec Skew between input clocks for dual A/Ds when clocked from the same source.
	Use of FET buffers eliminates phase variance in clocks.
	Chassis can be equipped with built in standard SMS, SDN, or Datolite output interface connectors and pins.
	1 Rack Unit Height
	Base Cost: $3000 -In Production

RI(ICE)-RMRF4 Quad Rack Mount A/D or D/A Converters

	Configurable With Up To 4 A/D Modules, 4 D/A Modules, Or Combinations That Total 4 Of Various A/D and D/A Modules
	For Quad A/D Converters, Front panel Switch Selectable Clocks, Up To 8 Choices Per A/D, Choose Between 4 External Sources Or 4 Socketed Oscillators.
	External Sources Derived Via A Comparator-AC Coupled 1Vp-p.

	Up To 4 ECL I/O Modules:16-bit Standard F100K Differential ECL Receivers Or Drivers.
	Custom Designed Internal low ripple power supplies
	Less than 1nSec Skew between input clocks for A/Ds when clocked from the same source.
	Use FET buffers eliminates phase variance in clocks.
	Chassis can be equipped with built in standard SMS, SDN, or Datolite output interface connectors and pins.
	Cost: $6000-In Production

RI(ICE)-A2DR4 14 Bit A/D Module

	Uses Analog Devices AD6644
	14-bit 65 MSPS A/D Converter (AC coupled, 1Vp-p, 50ohm)
	External clock derived via a comparator-AC coupled 1Vp-p.

Cost: $500-In Production

RI(ICE)-A2DR5 12 Bit A/D Module

	Uses One Analog Devices AD9432
	12-bit 105 MSPS A/D Converter With Sampling Range Of 1 MSPS To 105 MSPS
	Jumper Selectable DC or AC Coupling 1Vp-p, 50 Ohm Terminated
	SMB Connector For External Clock Reference Derived Via A Comparator-AC coupled 1Vp-p.
	Oscillator Socket For User Supplied Clock, Jumper Selectable With External Comparator Clock.
	Cost: $750-In Production

RI(ICE)-A2DR6 8 Bit A/D Module

	Uses Analog Devices AD9054
	8-bit 200 MSPS A/D Converter 1Vp-p Analog Input Range
	External clock derived via a comparator-AC coupled 1Vp-p.
	Oscillator Socket: For User Supplied Clock, Jumper Selectable With External Comparator Clock
	Data Output As Two "Married" 8 Bit Samples At 1/2 Sampling Frequency

Cost: $750-In Production

RI(ICE)-A2DR7 14 Bit A/D Module

	Uses Analog Devices AD6645
	14-bit 105 MSPS A/D Converter 1Vp-p Analog Input Range
	External clock derived via a comparator-AC coupled 1Vp-p.
	Oscillator Socket: For User Supplied Clock, Jumper Selectable With External Comparator Clock
	External Connector For 1-ppS Input-Stored In Bit 0 Of 16 Bit Word (14 Bit Data MSB Aligned)

Cost: $750-In Production

RI(ICE)-PA2D User Programmable FPGA and A/D Converter

	Uses Analog Devices AD9432 A/D Converter And Altera EPF10K10A FPGA
	FPGA Programming is user definable via Altera programming interface.
	12-bit 105 MSPS Sampling (AC Coupled, 1Vp-p 50 Ohm)
	External Clock Via A Comparator (1Vp-p 50 Ohm)
	Cost: $750-In Production

RI(ICE)-D2A 14 Bit D/A Module

	Uses Analog Devices AD9754
	14-bit 125 MSPS D/A Converter
	Jumper Selectable DC or AC coupled
	1Vp-p Analog Output Range
	2 Jumper Selectable Gain Controls Via Internal Default, On Board Potentiometer

Cost: $750-In Production

User Specified Module Production

	User Can Define A/D and/or D/A Type
	Module Layout And Testing Performed By rumeL, Inc. Takes Approximately 1 Month To Complete
	In Most Cases, NRE Charges Will Be Waived For Orders Of 10 Modules or More

Cost: Call For Pricing

A/D & D/A Input/Output Interfaces

	SMS (ELCO 75 Pin) Connector Integration Cost: $ 75 per I/O Connection
	SDN (AMP 90 Pin) Connector Integration Cost: $150 per I/O Connection
	Other Connection Interfaces Can Be Accommodated-Call For Pricing

Single A/D Full Cost Example:

	Full Cost = Base Cost + 1 A/D 14 Bit + 1 ECL Output + 1 SMS (ELCO) Interface
	Full Cost = $3000 + $500 + $250 + $75
	Full Cost = $3825
	Later Upgrade From Single To Dual Unit Costs: $500 + 250 + 75 = $825

Quad System w/Dual 8 Bit A/D and Dual 14 Bit D/A Cost Example:

	Full Cost = Quad Base Cost + 2 A/D 8 Bit + 2 ECL Outputs + 2 D/A 14 Bit +2 ECL Inputs + 4 SMS (ELCO) Interfaces
	Full Cost = $6000 + $1500 + $500 + $1500 + $500 + $300
	Full Cost = $10,300